How To Measure Trailer Axle Alignment. − tape tensioning (spring) device required for measurements with tape measure. You want an axle that is similar to the one currently under the trailer to avoid any problems with clearance.
How to measure trailer axle alignment adjust the trailer landing legs to the designed kingpin height. Measurement # 2 = spring center. How to order an axle.
Suspension / Trailer (E.g., Road Side, Front Axle, Rear Axle, Curb Side Rear, Etc.).
Measure from the straightedge to the frame in front of the wheel & record the measurement. In this video, i show you how to accurately place and square trailer axles with. Choose the same spot on.
Attach Axle Extension Tubes To The Spindles At The.
− tape tensioning (spring) device required for measurements with tape measure. 1.select your axle based on the current style you currently have on your trailer. How to order an axle.
Measurement # 2 = Spring Center.
Step 4 — focus on the position of the front spring brackets, left and right. Both dimensions should be the same. Do the same on both sides of the trailer to complete your trailer axle alignment.
Use Your Same Straightedge As Before:
How to measure an axle. You want an axle that is similar to the one currently under the trailer to avoid any problems with clearance. There is more to it than simply welding them on.
On A Dual Axle Trailer, You Can Also Measure The Axles To Make Sure They Are Aligned With Each Other.
If the measurements are off you can loosen up the suspension and straighten the axle. Both dimensions should be the same. They should be identical or within 1/8 of an inch, give or take 1/16 of an inch.